1404 cfm cooler pad system3/24/2024 ![]() The pads need to be replaced every year or two, depending on the pad. ![]() Consult your manual or cooler supplier if you aren’t sure which pad is right for your cooler.įiber pads are typically the least expensive pad and require the most maintenance. There are two main types of pads: fiber and rigid-sheet, which are discussed below. Copyright © 1998, American Water Works Association.)įigure 3: Inside a typical down-draft cooler.Įvaporative cooler pads need to be routinely checked and replaced as necessary. Pad maintenance is probably the most important part of keeping your cooling system working properly, and is discussed more thoroughly below.įigure 1: Remove the side panel for maintenance on a side-draft cooler.įigure 2: A typical down-draft evaporative cooler To insure maximum cooling, make sure that all pads are thoroughly and evenly wetted. Belt tension and water level in the reservoir should be checked. Ground and some eave mounted coolers are sometimes preferred because of their ease of maintenance as compared with roof mounted units.ĭuring a monthly inspection, first unplug the unit and look for any damage or wear. In general, coolers should be inspected monthly and serviced as required. ![]() ![]() Evaporative coolers vary, so the specific instructions that are available in the owner’s manual are very important. Although evaporative coolers require a fair amount of maintenance, homeowners can often easily perform it inexpensively by doing it themselves. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |